Jotul 155461 Replacement Black Door Handle Kit
OEM Jotul Part 155461 Replaces: Jotul 103712
Designed for the below Jotul Wood Stoves:
- F 100 Nordic Wood Stoves
- F 500 Oslo Wood Stoves (Front Door Handle)
- F 500 V3 Oslo Wood Stoves (Front Door Handle)
Before removing the old door handle; take a picture of how the door latch bolt on the inside of the stove is orientated to the cast iron door crank on the outside of the door. The steel shaft should be pointing up when the cast iron crank is pointing down.
If you have a roll pin holding the cast iron crank to the shaft you will have to remove your old door handle by cutting the latch bolt on the inside of the door with a hacksaw.
To install the new door handle, assemble the handle like what you see in the attached pictures with the latch bolt on the inside of the door pointing to 12 O’clock and the washer, spring and cast iron crank on the outside of the door with the cast iron crank pointing down. Once your sure about the alignment insert roll pin in cast iron crank and tighten with a 3mm Allen wench. Once the handle is installed you can then install the wood knob by inserting the bolt and sleeve into the wood knob with the fiber washer positioned between the wood knob and the cast crank. Using a screw driver tighten the screw while holding the washer and nut on the back side of the cast crank.
